Skip to content

Annotations

Service annotations

  • Annotation keys and values can only be strings. All other types below must be string-encoded, for example:
    • boolean: "true"
    • integer: "42"
    • stringList: "s1,s2,s3"
    • stringMap: "k1=v1,k2=v2"
    • json: "{ \"key\": \"value\" }"

Annotations

Warning

These annotations are specific to the kubernetes service resources reconciled by the AWS Load Balancer Controller. Although the list was initially derived from the k8s in-tree kube-controller-manager, this documentation is not an accurate reference for the services reconciled by the in-tree controller.

Name Type Default Notes
service.beta.kubernetes.io/load-balancer-source-ranges stringList
service.beta.kubernetes.io/aws-load-balancer-type string
service.beta.kubernetes.io/aws-load-balancer-nlb-target-type string
service.beta.kubernetes.io/aws-load-balancer-name string
service.beta.kubernetes.io/aws-load-balancer-internal boolean false deprecated, in favor of aws-load-balancer-scheme
service.beta.kubernetes.io/aws-load-balancer-scheme string internal
service.beta.kubernetes.io/aws-load-balancer-proxy-protocol string Set to "*" to enable
service.beta.kubernetes.io/aws-load-balancer-ip-address-type string ipv4 ipv4 | dualstack
service.beta.kubernetes.io/aws-load-balancer-access-log-enabled boolean false deprecated, in favor of aws-load-balancer-attributes
service.beta.kubernetes.io/aws-load-balancer-access-log-s3-bucket-name string deprecated, in favor of aws-load-balancer-attributes
service.beta.kubernetes.io/aws-load-balancer-access-log-s3-bucket-prefix string deprecated, in favor of aws-load-balancer-attributes
service.beta.kubernetes.io/aws-load-balancer-cross-zone-load-balancing-enabled boolean false deprecated, in favor of aws-load-balancer-attributes
service.beta.kubernetes.io/aws-load-balancer-ssl-cert stringList
service.beta.kubernetes.io/aws-load-balancer-ssl-ports stringList
service.beta.kubernetes.io/aws-load-balancer-ssl-negotiation-policy string ELBSecurityPolicy-2016-08
service.beta.kubernetes.io/aws-load-balancer-backend-protocol string
service.beta.kubernetes.io/aws-load-balancer-additional-resource-tags stringMap
service.beta.kubernetes.io/aws-load-balancer-healthcheck-protocol string TCP
service.beta.kubernetes.io/aws-load-balancer-healthcheck-port integer | traffic-port traffic-port
service.beta.kubernetes.io/aws-load-balancer-healthcheck-path string "/" for HTTP(S) protocols
service.beta.kubernetes.io/aws-load-balancer-healthcheck-healthy-threshold integer 3
service.beta.kubernetes.io/aws-load-balancer-healthcheck-unhealthy-threshold integer 3
service.beta.kubernetes.io/aws-load-balancer-healthcheck-timeout integer 10
service.beta.kubernetes.io/aws-load-balancer-healthcheck-interval integer 10
service.beta.kubernetes.io/aws-load-balancer-eip-allocations stringList internet-facing lb only. Length must match the number of subnets
service.beta.kubernetes.io/aws-load-balancer-private-ipv4-addresses stringList internal lb only. Length must match the number of subnets
service.beta.kubernetes.io/aws-load-balancer-target-group-attributes stringMap
service.beta.kubernetes.io/aws-load-balancer-subnets stringList
service.beta.kubernetes.io/aws-load-balancer-alpn-policy stringList
service.beta.kubernetes.io/aws-load-balancer-target-node-labels stringMap
service.beta.kubernetes.io/aws-load-balancer-attributes stringMap

Traffic Routing

Traffic Routing can be controlled with following annotations:

  • service.beta.kubernetes.io/aws-load-balancer-name specifies the custom name to use for the load balancer. Name longer than 32 characters will be treated as an error.

    limitations

    • If you modify this annotation after service creation, there is no effect.

    Example

    service.beta.kubernetes.io/aws-load-balancer-name: custom-name

  • service.beta.kubernetes.io/aws-load-balancer-type specifies the load balancer type. This controller reconciles those service resources with this annotation set to either nlb-ip or external.

    Tip

    This annotation specifies the controller used to provision LoadBalancers (as specified in legacy-cloud-provider). Refer to lb-scheme to specify whether the LoadBalancer is internet-facing or internal.

    • [Deprecated] For type nlb-ip, the controller will provision an NLB with targets registered by IP address. This value is supported for backwards compatibility.
    • For type external, the NLB target type depends on the nlb-target-type annotation.

    limitations

    • This annotation should not be modified after service creation.

    Example

    service.beta.kubernetes.io/aws-load-balancer-type: external

  • service.beta.kubernetes.io/aws-load-balancer-nlb-target-type specifies the target type to configure for NLB. You can choose between instance and ip.

    • instance mode will route traffic to all EC2 instances within cluster on the NodePort opened for your service.

      service must be of type NodePort or LoadBalancer for instance targets

    • ip mode will route traffic directly to the pod IP.

      network plugin must use native AWS VPC networking configuration for pod IP, for example Amazon VPC CNI plugin.

    Example

    service.beta.kubernetes.io/aws-load-balancer-nlb-target-type: instance

  • service.beta.kubernetes.io/aws-load-balancer-subnets specifies the Availability Zone the NLB will route traffic to. See Network Load Balancers for more details.

    Tip

    Subnets are auto-discovered if this annotation is not specified, see Subnet Discovery for further details.

    You must specify at least one subnet in any of the AZs, both subnetID or subnetName(Name tag on subnets) can be used.

    limitations

    • Each subnets must be from a different Availability Zone
    • AWS has restrictions on disabling existing subnets for NLB. As a result, you might not be able to edit this annotation once the NLB gets provisioned.

    Example

    service.beta.kubernetes.io/aws-load-balancer-subnets: subnet-xxxx, mySubnet

  • service.beta.kubernetes.io/aws-load-balancer-alpn-policy allows you to configure the ALPN policies on the load balancer.

    supported policies

    • HTTP1Only Negotiate only HTTP/1.*. The ALPN preference list is http/1.1, http/1.0.
    • HTTP2Only Negotiate only HTTP/2. The ALPN preference list is h2.
    • HTTP2Optional Prefer HTTP/1.* over HTTP/2 (which can be useful for HTTP/2 testing). The ALPN preference list is http/1.1, http/1.0, h2.
    • HTTP2Preferred Prefer HTTP/2 over HTTP/1.*. The ALPN preference list is h2, http/1.1, http/1.0.
    • None Do not negotiate ALPN. This is the default.

    Example

    service.beta.kubernetes.io/aws-load-balancer-alpn-policy: HTTP2Preferred

  • service.beta.kubernetes.io/aws-load-balancer-target-node-labels specifies which nodes to include in the target group registration for instance target type.

    Example

    service.beta.kubernetes.io/aws-load-balancer-target-node-labels: label1=value1, label2=value2

  • service.beta.kubernetes.io/aws-load-balancer-eip-allocations specifies a list of elastic IP address configuration for an internet-facing NLB.

    Note

    • This configuration is optional and use can use it to assign static IP addresses to your NLB
    • You must specify the same number of eip allocations as load balancer subnets annotation
    • NLB must be internet-facing

    Example

    service.beta.kubernetes.io/aws-load-balancer-eip-allocations: eipalloc-xyz, eipalloc-zzz

  • service.beta.kubernetes.io/aws-load-balancer-private-ipv4-addresses specifies a list of private IPv4 addresses for an internal NLB.

    Note

    • NLB must be internal
    • This configuration is optional and use can use it to assign static IP addresses to your NLB
    • You must specify the same number of private IPv4 addresses as load balancer subnets annotation
    • You must specify the IPv4 addresses from the load balancer subnet IPv4 ranges

    Example

    service.beta.kubernetes.io/aws-load-balancer-private-ipv4-addresses: 192.168.10.15, 192.168.32.16

Traffic Listening

Traffic Listening can be controlled with following annotations:

Resource attributes

NLB resource attributes can be controlled via the following annotations:

  • service.beta.kubernetes.io/aws-load-balancer-proxy-protocol specifies whether to enable proxy protocol v2 on the target group. Set to '*' to enable proxy protocol v2. This annotation takes precedence over the annotation service.beta.kubernetes.io/aws-load-balancer-target-group-attributes for proxy protocol v2 configuration.

    The only valid value for this annotation is *.

  • service.beta.kubernetes.io/aws-load-balancer-target-group-attributes specifies the Target Group Attributes to be configured.

    Example

    • set the deregistration delay to 120 seconds (available range is 0-3600 seconds) 
      service.beta.kubernetes.io/aws-load-balancer-target-group-attributes: deregistration_delay.timeout_seconds=120
    • enable source IP affinity 
      service.beta.kubernetes.io/aws-load-balancer-target-group-attributes: stickiness.enabled=true,stickiness.type=source_ip
    • enable proxy protocol version 2 
      service.beta.kubernetes.io/aws-load-balancer-target-group-attributes: proxy_protocol_v2.enabled=true
    • enable connection termination on deregistration 
      service.beta.kubernetes.io/aws-load-balancer-target-group-attributes: deregistration_delay.connection_termination.enabled=true
    • enable client IP preservation 
      service.beta.kubernetes.io/aws-load-balancer-target-group-attributes: preserve_client_ip.enabled=true

  • service.beta.kubernetes.io/aws-load-balancer-attributes specifies Load Balancer Attributes that should be applied to the NLB.

    Only attributes defined in the annotation will be updated. To unset any AWS defaults(e.g. Disabling access logs after having them enabled once), the values need to be explicitly set to the original values(access_logs.s3.enabled=false) and omitting them is not sufficient. Custom attributes set in this annotation's config map will be overriden by annotation-specific attributes. For backwards compatibility, existing annotations for the individual load balancer attributes get precedence in case of ties.

    • If deletion_protection.enable=true is in the annotation, the controller will not be able to delete the NLB during reconciliation. Once the attribute gets edited to deletion_protection.enable=false during reconciliation, the deployer will force delete the resource.
    • Please note, if the deletion protection is not enabled via annotation (e.g. via AWS console), the controller still deletes the underlying resource.

    Example

    • enable access log to s3 
      service.beta.kubernetes.io/aws-load-balancer-attributes: access_logs.s3.enabled=true,access_logs.s3.bucket=my-access-log-bucket,access_logs.s3.prefix=my-app
    • enable NLB deletion protection 
      service.beta.kubernetes.io/aws-load-balancer-attributes: deletion_protection.enabled=true
    • enable cross zone load balancing 
      service.beta.kubernetes.io/aws-load-balancer-attributes: load_balancing.cross_zone.enabled=true

  • the following annotations are deprecated in v2.3.0 release in favor of service.beta.kubernetes.io/aws-load-balancer-attributes

    service.beta.kubernetes.io/aws-load-balancer-access-log-enabled
service.beta.kubernetes.io/aws-load-balancer-access-log-s3-bucket-name
service.beta.kubernetes.io/aws-load-balancer-access-log-s3-bucket-prefix
service.beta.kubernetes.io/aws-load-balancer-cross-zone-load-balancing-enabled

AWS Resource Tags

The AWS Load Balancer Controller automatically applies following tags to the AWS resources it creates (NLB/TargetGroups/Listener/ListenerRule):

  • elbv2.k8s.aws/cluster: ${clusterName}
  • service.k8s.aws/stack: ${stackID}
  • service.k8s.aws/resource: ${resourceID}

In addition, you can use annotations to specify additional tags

  • service.beta.kubernetes.io/aws-load-balancer-additional-resource-tags specifies additional tags to apply to the AWS resources.

    • you cannot override the default controller tags mentioned above or the tags specified in the --default-tags controller flag
    • if any of the tag conflicts with the ones configured via --external-managed-tags controller flag, the controller fails to reconcile the service

    Example

    service.beta.kubernetes.io/aws-load-balancer-additional-resource-tags: Environment=dev,Team=test

Health Check

Health check on target groups can be configured with following annotations:

TLS

You can configure TLS support via the following annotations:

  • service.beta.kubernetes.io/aws-load-balancer-ssl-cert specifies the ARN of one or more certificates managed by the AWS Certificate Manager.

    The first certificate in the list is the default certificate and remaining certificates are for the optional certificate list. See Server Certificates for further details.

    Example

    service.beta.kubernetes.io/aws-load-balancer-ssl-cert: arn:aws:acm:us-west-2:xxxxx:certificate/xxxxxxx

  • service.beta.kubernetes.io/aws-load-balancer-ssl-ports specifies the frontend ports with TLS listeners.

    • You must configure at least one certificate for TLS listeners
    • You can specify a list of port names or port values, * does not match any ports
    • If you don't specify this annotation, controller creates TLS listener for all the service ports
    • Specify this annotation if you need both TLS and non-TLS listeners on the same load balancer

    Example

    service.beta.kubernetes.io/aws-load-balancer-ssl-ports: 443, custom-port

  • service.beta.kubernetes.io/aws-load-balancer-ssl-negotiation-policy specifies the Security Policy for NLB frontend connections, allowing you to control the protocol and ciphers.

    Example

    service.beta.kubernetes.io/aws-load-balancer-ssl-negotiation-policy: ELBSecurityPolicy-TLS13-1-2-2021-06

  • service.beta.kubernetes.io/aws-load-balancer-backend-protocol specifies whether to use TLS for the backend traffic between the load balancer and the kubernetes pods.

    • If you specify ssl as the backend protocol, NLB uses TLS connections for the traffic to your kubernetes pods in case of TLS listeners
    • You can specify ssl or tcp (default)

    Example

    service.beta.kubernetes.io/aws-load-balancer-backend-protocol: ssl

Access control

Load balancer access can be controlled via following annotations:

  • service.beta.kubernetes.io/load-balancer-source-ranges specifies the CIDRs that are allowed to access the NLB.

    Tip

    we recommend specifying CIDRs in the service Spec.LoadBalancerSourceRanges instead

    Default

    • 0.0.0.0/0 will be used if the IPAddressType is "ipv4"
    • 0.0.0.0/0 and ::/0 will be used if the IPAddressType is "dualstack"
    • The VPC CIDR will be used if service.beta.kubernetes.io/aws-load-balancer-scheme is internal

    This annotation will be ignored in case preserve client IP is not enabled. - preserve client IP is disabled by default for IP targets - preserve client IP is enabled by default for instance targets

    Example

    service.beta.kubernetes.io/load-balancer-source-ranges: 10.0.0.0/24

  • service.beta.kubernetes.io/aws-load-balancer-scheme specifies whether the NLB will be internet-facing or internal. Valid values are internal, internet-facing. If not specified, default is internal.

    Example

    service.beta.kubernetes.io/aws-load-balancer-scheme: "internet-facing"

  • service.beta.kubernetes.io/aws-load-balancer-internal specifies whether the NLB will be internet-facing or internal.

    deprecation note

    This annotation is deprecated starting v2.2.0 release in favor of the new aws-load-balancer-scheme annotation. It will be supported, but in case of ties, the aws-load-balancer-scheme gets precedence.

    Example

    service.beta.kubernetes.io/aws-load-balancer-internal: "true"

Legacy Cloud Provider

The AWS Load Balancer Controller manages Kubernetes Services in a compatible way with the legacy aws cloud provider. The annotation service.beta.kubernetes.io/aws-load-balancer-type is used to determine which controller reconciles the service. If the annotation value is nlb-ip or external, legacy cloud provider ignores the service resource (provided it has the correct patch) so that the AWS Load Balancer controller can take over. For all other values of the annotation, the legacy cloud provider will handle the service. Note that this annotation should be specified during service creation and not edited later.

The legacy cloud provider patch was added in Kubernetes v1.20 and is backported to Kubernetes v1.18.18+, v1.19.10+.